+1-316-444-1378

Rewrite/Reword and organize the attached manual, while keeping the pictures the same.

You will provide a comprehensive and detailed manual documenting the step-by-step process for building a computer using the components provided in LabSim 14.1: Build a Computer from Scratch. The manual will be used by entry-level technicians, so it should be clear, concise, and formatted using the IEEE citation style(https://content.umuc.edu/file/a2c4b4bc-a4ff-41a4-8eac-0cf91b8f0ba9/11/IEEE.html), with screenshots of each step from LabSim 14.1. Your manual should be similar to step-by-step instructions on How to Change the Oil in Your Car (https://content.umuc.edu/file/d77795d2-7113-4f52-94a2-0a7e092765d3/1/HowtoChangetheOilinYourCar.pdf) . Note carefully how in this example, not only is each step described individually, and in detail, but also there is a visual representation of each step. You should model your submission along the same lines. Keep in mind that your manual will be used as a guide for new technicians.

The manual should not document how to complete a LabSim section; rather, it should provide detailed instructions on how to build an actual computer for a potential customer:

The manual will be submitted in three separate parts. Part 1 addresses Sections 1-5 of the overall manual, Part 2 addresses Sections 6-10, and Part 3 addresses Sections 11-12.

PC Build & Manual Part 1:

1. Workspace Preparation (LabSim 2.0)
2. Installing Motherboard (LabSim 3.3)
3. Installing Power Supply (LabSim 3.2)
4. Installing CPU (LabSim 3.5)
5. Installing RAM (LabSim 3.7/3.8)

PC Build & Manual Part 2:

6. Installing Hard Drive (LabSim 5.2)
7. Installing Optical Drive (LabSim 5.3)
8. Installing Video Card (LabSim 3.12)
9. Connecting Monitors, Keyboard, and Mouse (LabSim 4.0)
10. BIOS Configuration (LabSim 3.10)

PC Build & Manual Part 3:

11. Installing Windows 10 (LabSim 10.3)
12. Configuring Critical Windows Features (10.0, 11.0 12.0, and 13.0)